A new video has been added this week in respect of the multimo portable satellite system.  This is in response to customers requests to provide a little more information about how to use the Multimo.

This is the video from Tim at TSW Comsat who sell the Multimo Portable Satellite Dish

It is rare to have a day that goes by without someone asking me how to set up their Multimo Satellite dish.

Multimo

The problem seems to arise from the close proximity of the Astra 1 and Astra 2 satellites.

However this is the solution I find works the best.

SatFinder

When using the Multimo dish, you have to use a satellite finder to locate the satellite. This is relativly easy by turning the satellite finder up until it makes a noise and all the lights are illuminated.

Next turn down the Satfinder until it stops making a noise. THE TIP IS : Turn the Satfinder down an 1/8 of a turn further.

The reason for doing this is to reduce the sensitivity of the finder as the signal from Astra1 is weaker than the signal of the Astra 2 satellite. EASY

One more tip – If you are in the United Kingdom, set the hight of the dish to 23 degrees on the slide at the side.

Job Done.